Automatic Walking Beam Cooling Bed For Billet And Rebar

Product Description

Cooling bed is an important equipment in the field of steel rolling. It used to receiving, transmissing and cooling the rolled piece. After sizing or reducing , the temperature of pipe is generally above 700 °C. It must be cooled to below 150 °C for subsequent finishing process. The pipe cooling is usually carried out on cooling bed.

Main parts
Cooling bed include mechanical drive system, water cooling system, work surface and fixed support and so on.
Advantage
(1) simple structure;
(2) low investment;
(3) easy operation.

Composition:Cooling bed consist of mechanical transmission system, water cooling system, cooling bed working tableand fixed support.

Working principle: The finished products are delivered to cooling bed via conveying roller table, and then extracted by therack step by step, being pushed to the top of cooling bed, to achieve the effect of cooling rolled piece.

Main application: The cooling bed equipment is mainly used for naturally slow on-line cooling of rolled steel plate. In theprofile production line, cooling bed also has the function of preventing bending, to prevent irregular curve of profilesthrough the process of natural cooling due to various quality problems. Areas of application: mainly used in steel industry,metallurgical industry, rebar production line, round production line, pipe production line, etc.

Company Information

FUJIAN PUTIAN GEILI MACHINERY MANUFACTURING CO.,LTD

wasfounded in 1995,formerly known as XianyouRolling Mill Manufacturer.In2001,merged withXianyou Bangtou Mill Roll Manufacturer.In 2008,wefocused on continuous casting and rolling production line equipment.In 2011,the company reorganized and establishedFUJIAN PUTIAN GEILI MACHINERY MANUFACTURING CO.,LTD,whichengaged inmetallurgical equipment,mainly in steel-making,continuous casting andcompleterolling production line research and development,design,manufacturing,installationand general contracting services.

Main products:所有kinds of specifications continuous castingmachines, rolling production line equipment and variousauxiliaryequipment,also the spare parts.Besides,weprovidetechnical consultant,turnkey solution and one-stop service forsteel plant ofdeformedrebar , wire rod , angle bar, channel beam, strip and other steel related production line. The Solution was based on the customer request, such as annual capacity from30,000 tons to over800000吨,滚动速度3米/秒to90米/秒.

1) Providing professional proposal of suitable production line as per customers' invest and capacity requirement
2) Providing turn-key service of designing, manufacturing, installation and commissioning for the whole production lines to meet customers requirement
3) Providing foundation layout and arrangement diagram for your plant
4) Providing technical support. We will send various technical staff to the site until the final products are meet to customers' own request.
5) Good after-sales service will be provided. Our long-term technical service will be provided if you want to adjust the production line, develop new products or improve the equipment.
6) Quality warranty will be promised.

Quality Control:
Quality control (QC) is a procedure or set of procedures intended to ensure that a manufactured product or performedservice adheres to a defined set of quality criteria or meets therequirements of the client or customer.
Finish Product QC
Ensure all the dimension and technical process are correct
Drawing QC
Ensure all the drawing are inspected by Profesional Enginners
Shipping QC
Ensure the product pass to customer are optimum and correct quantity.

Packing & Shipping